Config Flowstats Source - Extreme Networks ExtremeWare Command Reference Manual

config flowstats source

config flowstats source ipaddress <ipaddress>
Description
Configures the IP address that is to be used as the source IP address for NetFlow datagrams to be
exported.
Syntax Description
ipaddress
Default
Uses the IP address of the VLAN that has the default route to the flow-collector device.
Usage Guidelines
The IP address must have a route to the flow-collector device.
Example
The following command specifies that IP address 198.168.100.1 is the source:
config flowstats source ipaddress 198.168.100.1
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on the "i" series platforms.
ExtremeWare Software 7.0.0 Command Reference Guide
Specifies the IP address of a VLAN to be used as the source address for the
Net FL ow datagrams.
config flowstats source
511