Config Inline-Power Backup-Source - Extreme Networks ExtremeWare Command Reference Manual

config inline-power backup-source

config inline-power backup-source [internal | none] slot <slot_number>
Description
Configures the backup power supply for the external 48V power source.
Syntax Description
internal
none
slot_number
Default
None.
Usage Guidelines
This commands lets you specify whether or not there is a backup power supply to the external 48V
power source. If
48V loses power. If
loses power. In that case, the ports will not be able to provide power.
Example
The following command sets the internal power supply as the backup power supply to the external 48V
power supply for slot 1:
config inline-power backup-source internal slot 1
History
This command was first available in ExtremeWare 7.2.
Platform Availability
This command is available on Alpine series I/O modules only.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies that the internal power supply will serve as the backup power supply
if the external 48V power source loses power.
Specifies that there is no backup power supply if the external 48V power
source loses power. In this case, the ports will not be able to provide power.
Specifies the slot for which the backup power supply is being configured.
is selected then the internal power supply will be brought up if the external
internal
is selected, then no other power supply will be brought up if the external 48V
none
config inline-power backup-source
1903