High-Density Gigabit Ethernet Commands—Alpine 3800 and BlackDiamond 6800 Series Only
unconfigure diffserv ingress replacement ports
unconfigure diffserv ingress replacement ports [<portlist> | all]
Description
Resets the optional overwriting of the DiffServ code point portion of the IP TOS field for ingress traffic
to its defaults.
Syntax Description
portlist
Specifies one or more slots and ports. May be in the form 2:*, 2:5, 2:6-2:8.
"3"
all
Specifies all
series ports.
Default
N/A
Usage Guidelines
Use this command to reset the low-priority and high-priority code point values to 0 and to disable
DiffServ ingress replacement.
Example
The following command resets the DiffServ code points to their defaults:
unconfigure diffserv ingress replacement ports all
History
This command was first available in ExtremeWare 7.1.
Platform Availability
This command is available on
2276
"3"
series I/O modules only.
ExtremeWare 7.7 Command Reference Guide