Configure Iparp Delete - Extreme Networks ExtremeWare Command Reference Manual

IP Unicast Commands

configure iparp delete

configure iparp delete <ip address>
Description
Deletes an entry from the ARP table. Specify the IP address of the entry.
Syntax Description
ip address Specifies an IP address.
Default
N/A.
Usage Guidelines
Removes any IP ARP entry (dynamic or permanent) from the table. The is used to match
ip address
the IP interface address to locate a suitable interface.
Example
The following command deletes an IP address entry from the ARP table:
configure iparp delete 10.1.2.5
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
1156 ExtremeWare Software 7.3.0 Command Reference Guide