Pools - Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features

Pools

Pools
At a Glance
Users Affected
Reports Affected
Modes
Telephones
System Programming
Maximums
Pools for each system
Lines/trunks for each pool
Buttons assigned for each
pool
Factory Settings
Main Pool
Ground-Start Trunk Pool
Dial-In Tie Trunk
Automatic-In Tie Trunk
Pool Dial-Out Code
Restriction
Description
Hybrid/PBX mode allows outside lines/trunks to be grouped together in pools.
Users select lines/trunks by using SA buttons, instead of having separate buttons
for each line/trunk in the system. To access pools using SA buttons, people dial
pool dial-out codes. Pools also can be assigned to buttons on one or more
telephones to allow a user to select the pool without dialing the pool dial-out code
or ARS access code. In Release 3.1 and later systems, the factory setting does
not allow any extensions to use pool dial-out codes. To allow a user to access a
pool by entering a dial-out code, the system manager must remove the restriction
for the dial-out code and the extension.
Telephone users, operators, data users
Dial Plan Information
Hybrid/PBX only
All
Assign individual lines/trunks to pools:
LinesTrunks
Assign Pool buttons to telephones:
Extensions
Restrict telephone from using pool dial-out code:
Extensions
11
Unlimited
64
70
890
891
892
No access to any pool
Pools
LinesTrunks
Dial OutCd
Issue 1
April 1999
500