Remote Access - Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features

Remote Access

Remote Access
At a Glance
Users Affected
Reports Affected
Modes
Telephones
System Programming
Maximums
Telephone users, operators, data users
Remote Access (DISA) Information, SMDR
All
Touch-tone only
Assign dedicated or shared remote access to lines/trunks:
LinesTrunks
If barrier codes are not used, assign class of restrictions to
lines/trunks:
LinesTrunks
Lines Restriction/ARS Restrct/AllowList/
DisallowList
Assign class of restriction for each barrier code:
LinesTrunks
Restriction/ARS Restrct/AllowList/
DisallowList
Specify that barrier codes are required for remote access:
LinesTrunks
Lines BarrierCode
Add, change, or remove individual barrier codes, or change
length of all barrier codes:
LinesTrunks
CodeInfo
Assign barrier codes to remote access system programming
lines/trunks (nonfunctional; do not use):
LinesTrunks
SProgMaint
Enable or disable Callback for busy pools:
LinesTrunks
Specify destination of remote access calls to unassigned
numbers:
More
Options
Change remote access code:
SysRenumber
16 barrier codes, with a 4- to 11-digit length (set systemwide),
using 0–9 and dialpad characters. All barrier codes are
deleted when the systemwide barrier code length is changed.
RemoteAccss LinesTrunks
RemoteAccss Non-Tie/Tie
RemoteAccss BarrierCode
RemoteAccss Non-Tie/Tie
RemoteAccss BarrierCode
RemoteAccss BarrierCode
RemoteAccss AutoQueuing
Unassigned
Single RemoteAccs
Issue 1
April 1999
602