Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference page 225

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features
Conference
Conference
Coverage
CTI Link
Digital Data Calls
Directories
In Behind Switch mode, the fixed-function Conf button applies to
Centrex operation and is not recognized by the communications
system. A button can be programmed for communications system
Conference.
In Behind Switch mode, the fixed-function Drop button applies to
Centrex operation and is not recognized by the communications
system. A button can be programmed for communications system
Drop.
You can originate a conference call from a Cover button only when
you press the Transfer button, dial the number for another person,
and then press the Conf button to complete the transfer. In this
case, however, instead of the call being transferred, a conference
call with three participants (including the originator) is established.
CTI link applications can control conferences of up to three parties,
including those where one or two parties are outside the system.
When performed by a QCC operator or unmonitored DLC operator,
the Conference feature generates screen pop at screen pop-
capable destinations.
When a conference is initiated manually at the telephone of an
extension using a CTI application, screen pop is initiated for inside
parties only (not initiated for outside parties) at screen pop-capable
destinations, even when the application is used to complete the
conference.
If the non-local dial plan recipient of a conference call is a
PassageWay Telephony Services client, the recipient's display
shows caller information about the conference originator, not about
any other caller. Users at CTI-linked PassageWay Telephony
Services extensions must use the telephones at their extensions to
add conferees to a conference. They cannot use their PassageWay
Conference does not function with data calls.
Video application conference features do not function with the
system.
2B data video calls require both B-channels at a video workstation.
For this reason, if a call is on hold for conferencing at a passive-bus
MLX telephone when a 2B call comes in, the passive-bus MLX
telephone cannot retrieve the held call until the 2B video call is over.
The Extension, Personal, and System Directory features can be
used to set up conference calls. Press the Conf button to enter the
Flash special character in a Directory listing telephone number.
Press the Drop button to enter the Stop special character.
Issue 1
April 1999
165