Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference page 417

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features
Group Calling
Queue control applies to the following types of calls:
DID and dial-in tie trunk calls.
PRI facilities programmed for dial-plan routing.
Calls that are transferred from a VMI port.
Calls transferred on an inside or private network line.
Inside calls to the calling group.
Inside Dial 0 (#0) and #800 calls delivered to the calling group that is
assigned as the QCC Position-Busy backup.
Private network calls (Release 6.0 or later systems only).
NOTE:
Dial-in tie trunks, including private tandem tie trunks (Release 6.0 and later
systems, Hybrid/PBX only) cannot be assigned directly to calling groups.
Queue control does not apply to calls received directly on any of the following
facilities:
Loop-start lines.
Ground-start lines/trunks.
Auto-in tie trunks.
BRI lines.
T1 facilities emulating ground-start or loop-start lines.
PRI facilities programmed for line-appearance routings.
In addition, remote-access calls to a calling group, coverage calls directed to a
calling group, overflow calls, and outside calls directed to a calling group through
QCC Position-Busy backup are not eligible for queue control.
NOTE:
For private network trunks, the call returns only when PRI lines are
used and the transfer has been manually completed. Calls
transferred to a local calling group or using network PRI lines return
to the transfer originator.
Issue 1
April 1999
357