Pools (Hybrid/Pbx Mode Only) - Lucent Technologies MERLIN LEGEND Release 7.0 System Planning Manual

Hide thumbs Also See for MERLIN LEGEND Release 7.0:
Table of Contents

Advertisement

MERLIN LEGEND Communications System Release 7.0
System Planning 555-670-112
3
Lines/Trunks
Selecting Line/Trunk Options
Considerations to be used in deciding the priority level are discussed in the
description of Queued Call Consoles in the Feature Reference .
Since incoming calls on DID and non-automatic-in tie trunks route to specific
extension numbers, you cannot assign a QCC queue priority for these types of
trunks. Also, QCC queue priority cannot be assigned to private network tandem
trunk types (Legend-PBX or Legend-NTWK). However, calls received can be
directed to the Listed Directory Number (LDN) which has queue priority set.
Planning Form Instructions
On Form 2c, for each line/trunk with
Operator to Receive Calls column, write the priority level (1 to 7) in the QCC
Queue Priority Level column for each line/trunk used for incoming calls. (A value
of 1 indicates the highest priority; a value of 7 indicates the lowest. The factory-set
priority for calls received on all trunks programmed to ring in the queue is 4.)

Pools (Hybrid/PBX Mode Only)

The system can have up to 11 pools with factory-set dial-out codes of 70 and 890
through 899. When the system is set up, pools are assigned automatically (see
the Feature Reference ). If you want any lines/trunks grouped in a pool, you must
manually assign each line/trunk to the pool of your choice. Use the instructions in
this section.
NOTES:
Decide whether to change the dial-out codes. Apply the same considerations as
you do for reassigning extension numbers.
Pools can be assigned to calling groups and all trunks within the pool
are directed to members of the calling group. Individual trunks within a
pool cannot be assigned to calling groups.
If the pool contains any dial-in trunks (such as DID trunks), the pool
cannot be assigned to a calling group. Also, pools with private network
tandem trunks should not be assigned to calling groups.
or an extension number in the QCC
3
Issue 1
April 1999
3-16
3

Advertisement

Table of Contents
loading

Table of Contents