Etr And Mls Non-Display Telephones - Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
H Programming Special Characters

ETR and MLS Non-display Telephones

ETR and MLS Non-display
Telephones
Some dialing sequences need special characters—for example, the user presses
Hold to insert a Pause character after the dial-out code in a dialing sequence to
allow the system to seize an outside line before dialing the number. A Pause
character can also be used to separate a telephone number from an extension
number.
Table H-5.
Press...
1
Drop
Hold
Conf
#
##
1 The Drop button must be programmed on ETR and MLS telephones.
Special Characters for ETR and MLS Non-display Telephones
Means...
Stop. Halts the dialing sequence to allow for system
response.
Pause. Inserts a 1.5-second pause in the dialing
sequence. Multiple consecutive pauses are allowed.
Flash. Sends a switchhook flash. Must be the first entry in
the dialing sequence.
End of Dialing for extension programming only. Used
at the end of a dialing sequence to indicate that the user
has finished dialing or to separate one group of dialed
digits from another.
End of Dialing. Used to signal the end of the dialing
sequence or to separate one group of dialed digits from
another.
Issue 1
April 1999
H-5