Basic Rate Interface (Bri) - Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features

Basic Rate Interface (BRI)

Basic Rate Interface (BRI)
At a Glance
Users Affected
Reports Affected
Modes
Telephones
System Programming
800 NI-BRI Module
Maximums
BRI modules
Factory Settings
Systemwide Clock
Synchronization Source
Primary Clock
Clock
BRI
Service Profile Identifier
(SPID) assigned to BRI line
Directory Number (DN)
assigned to BRI line
Timer and counter thresholds
for all BRI ports in system
T200 Timer
T203 Timer
T303 Timer
T305 Timer
T308 Timer
Telephone users, operators, digital data users
System Information (SysSet-up), BRI Information
Key, Hybrid/PBX
All
Calling Party Number appears on the MLX, ETR, and
MLS display telephones.
Called Party Number appears on the MLX and ETR
display telephones.
Specify 800 NI-BRI modules that provide primary,
secondary, and tertiary clock synchronization and source-
of-clock synchronization; also activate/deactivate clock:
LinesTrunks More ClockSync
Assign telephone numbers (SPID and DN) to BRI
lines:
LinesTrunks More BRI SPID/DN
Enter DN Enter
Specify BRI timer settings:
LinesTrunks More BRI Timers
5
Loop (not definable by system manager)
First port in service on an 800 NI-BRI module, or first
100D module in service in control unit
Active
0 digits
0 digits
1,000 ms (range 500–5,000 ms, increments of 500 ms)
33 seconds (range 10–255 seconds, increments of 1 second)
4 seconds (range 2–10, increments of 1 second)
30 seconds (range 2–60, increments of 1 second)
4 seconds (range 2–10, increments of 1 second)
Issue 1
April 1999
99
SPID