Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference page 202

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features
Camp-On
Other Multiline Telephones
Camp-On can be used with a multiline telephone when you hear ringing, a busy
tone, or call-waiting ringback while transferring a call. To use Camp-On to
complete the transfer, press a programmed Camp-On button, or press the
Feature button and dial 57. With MLX display telephones, you can also press the
Feature button and select Camp On from the display.
Single-Line Telephones
Calls can be camped on to single-line telephones, but you cannot use Camp-On
from a single-line telephone.
Feature Interactions
Call Waiting
Coverage
Digital Data Calls
Direct-Line Console
Direct Station
Selector
Display
Do Not Disturb
If there are no buttons available to receive a transferred call, you hear the
call-waiting tone when a caller uses Camp-On to transfer a call, even if
Call Waiting is not activated.
All individual and/or Group Coverage points must be busy before a call
can be camped on to a coverage sender's extension. Coverage calls
answered by a receiver can be camped-on to another user.
You cannot camp onto data or video calls.
When a DLC operator uses Camp-On to transfer a call to a busy
extension, the call is placed in the call-waiting queue and the caller hears
the call-waiting tone, whether or not the extension has Call Waiting
activated. If the system is programmed for one-touch Transfer with
automatic completion, the operator uses Camp-On by pressing the
Transfer button, dialing the extension manually, activating Camp-On,
hanging up, and pressing either another line button or the Transfer button
again. If the operator presses an inside Auto Dial or DSS button, the
transfer is automatically completed and Camp-On cannot be used.
When Camp-On is used to complete a transfer and the call returns, the
LED for the DSS button for the extension to which the call has been
transferred goes off and does not flash as it does for a transfer return or
Park return.
After Camp-On is activated, the MLX display shows a feedback message.
The Camp-On Return display depends on whether the call is an inside or
outside call and whether or not calling party information is provided.
On the QCC only, returning camped-on calls are identified by call type
and by the name and extension number of the person to whom the call
was transferred. The second line of the QCC display also shows the caller
information.
A Camp-On call does not ring when Do Not Disturb is activated.
Issue 1
April 1999
142