Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference page 486

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features
Last Number Dial
Microphone Disable
Recall/Timed Flash
Service Observing
SMDR
Speed Dial
System Access/
Intercom Buttons
Transfer
When an MLX telephone user's microphone is disabled, pressing the
programmed Last Number Dial button before lifting the handset turns on
the speakerphone so the user can hear the number being dialed. Once
the call is answered, however, the user must lift the handset to talk.
Recall can be used on a call made with Last Number Dial on a personal
line or Pool button (loop-start only), on an inside call, or, in Release 2.0
and later systems, on an outside call made on a loop-start line by using
an SA or ICOM button.
In Release 6.1 and later systems extensions that use Last Number Dial to
place a call can be observed.
All outside numbers dialed using Last Number Dial are recorded on the
SMDR report.
Telephone numbers dialed using Personal Speed Dial are stored by Last
Number Dial. However, if the number includes special characters such as
Pause or Stop, the special characters do not work when the number is
redialed using Last Number Dial. Telephone numbers dialed using
System Speed Dial are not stored by Last Number Dial.
When Last Number Dial is used on a call made with a Shared SA button,
the number is stored on the extension where Last Number Dial was used,
not on the principal extension.
Last Number Dial can be used to dial the outside number of the telephone
to which the call is being transferred.
Issue 1
April 1999
426