Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference page 624

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features
Programming
Centralized Telephone Programming
Centralized telephone programming allows the system manager to program, from
a single location, any feature that can be programmed by individual extension
users or system operators. Centralized telephone programming can be done on
the programming console (MLX-20L) or on a PC with SPM software.
The following features can be programmed only through centralized telephone
programming (not by individual users):
Barge-In
Headset Hang Up
All SA buttons (Hybrid/PBX mode) and ICOM buttons (Key and Behind
Switch modes)
Service Observing button
Extension Programming
Extension Programming allows extension users and system operators to
customize their extensions to meet personal needs. Multiline telephone users can
assign a wide range of features to buttons on the telephone. Many other settings
(Call Waiting, for example) that do not require button assignment can be
programmed on both multiline telephones and single-line telephones.
Users can program their extensions by dialing programming codes or, on MLX
display telephones, by selecting features from the display. When an extension
user programs his or her extension, the system considers the extension busy;
therefore, no incoming calls arrive at the extension until programming is
completed. See
Programming''
analog multiline, and single-line telephones.
NOTE:
Before you begin to program a feature onto a button that already has a
feature assigned to it, make sure that any light associated with the button is
off. In some cases, if the light is on, the feature remains active, even though
a new feature has been programmed onto the button. If this happens, you
can turn off the original feature only by programming a new button with that
feature and deactivating the feature with that button. You can then delete
the new feature.
Appendix D, ''General Feature Use and Telephone
for instructions on how to program features on MLX, ETR, MLS,
Issue 1
April 1999
564