Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference page 531

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features
Paging
Speakerphone Paging
An announcement made by using Speakerphone Paging is heard on telephones
with built-in speakerphones (except single-line telephones with built-in
speakerphones) or speakerphone adjuncts. Speakerphone Paging can be
directed to an individual telephone, to groups, or to all speakerphones.
Individual Paging
An SA Voice or ICOM Voice button on a multiline telephone is used for
Speakerphone Paging directed to an individual extension (also called
voice-announced inside calling). Select the voice button, and then dial the
extension number of the telephone to receive the voice-announced call. If the
voice announcement can be made, the caller hears a tone and then speaks into
the handset.
The person called hears the announcement over the speakerphone, unless one of
the following conditions exists:
The telephone does not have a speaker.
The person called is using the speakerphone.
The person called is on an analog multiline telephone, and the system
manager has removed Voice Announce from the extension.
The person called is busy on an MLX telephone and has Voice Announce
to Idle Only on (Release 7.0 or later systems).
The person called has turned off Voice Announce.
The person called is using Do Not Disturb.
The person called is a QCC operator.
The person is active on a call on an ETR or MLS telephone
When any of these conditions exists, the caller hears ringback if the person called
has an available SA or ICOM button. The caller hears a busy, call-waiting, or
callback tone when the person called is busy on all SA or ICOM buttons. If the
person called is using Do Not Disturb, the caller hears a busy signal.
Speakerphone Paging to an individual extension is considered an inside call. The
green LED next to an available SA or ICOM button flashes to indicate an incoming
call. The person called either can use the Hands-Free Answer on Intercom (HFAI)
feature to talk to the caller or can pick up the handset to speak.
Group Paging
Group Paging directs Speakerphone Paging either to a selected group of
extensions, such as a department or work area, or to all extensions in the system,
except QCC operator positions.
Issue 1
April 1999
471