Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference page 527

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features
Night Service
Display
Forward and
Follow Me
Group Calling
HotLine
Multi-Function
Module
Music-On-Hold
Paging
Personal Lines
If a system operator must enter a password to turn Night Service on and
off, the display prompts the operator for the password. No message is
displayed either when an operator activates Night Service by using a
feature code or when Night Service is off.
If an MLX display telephone is in test mode and a Night Service call
arrives, the call rings at the telephones. Calling information, however, is
not displayed until the Home button is pressed.
When an extension is a member of a Night Service group and Night
Service is activated, calls received at the extension are forwarded to
extensions by using Forward and Follow Me, but are not forwarded to
outside or non-local telephone numbers when Remote Call Forwarding is
used.
In Release 6.1 or later systems (Hybrid/PBX mode only), if the operator in
charge of Night Service forwards calls to an outside number or a non-
local extension, only calls received on lines to which the operator is
assigned as the principal owner are forwarded. All other calls are not
forwarded.
In Release 2.0 and later systems, a calling group can be a Night Service
group member. If a calling group is used as a Night Service member, no
other calling groups or extensions are allowed to be Night Service
members.
In Release 6.1 and later systems (Hybrid/PBX mode only), a calling group
receiving Night Service calls may contain a non-local extension as its only
member.
HotLine extensions (Release 5.0 and later systems) can be members of
Night Service groups. If a HotLine extension dials an outside call and
Night Service with Outward Restriction is on, either the HotLine extension
number must be in the Night Service Exclusion List or the number it dials
must be on the Night Service Emergency List.
An MFM can be a member of a Night Service group. An external alert
connected to the MFM in Supplemental Alert Adapter (SAA) operation,
when assigned to a Night Service group, can be used for supplemental
ringing for after-hours calls.
A line/trunk jack programmed for Music-On-Hold cannot be assigned to a
Night Service group.
A line/trunk jack programmed as a Loudspeaker Paging port cannot be
assigned to a Night Service group.
If the voice mail calling group is assigned as a member of a Night Service
group, incoming lines receive Automated Attendant treatment. When a
call is answered by the Night Service group, ringing does not occur at an
extension with that personal line and the Night Service coverage is used
instead of the principal user's coverage.
Issue 1
April 1999
467