Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference page 546

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features
Personal Lines
If a line/trunk is not assigned as a personal line, grouped in a pool (Hybrid/PBX
only), or assigned to ring into the Queued Call Console (QCC) queue, and a call is
received on the line/trunk, the caller hears a ringback even if that line/trunk does
not terminate anywhere in the system.
When an extension is programmed as the principal user (owner) of a personal
line, only the principal user can forward calls to an outside number by using
Remote Call Forwarding. When the owner has Individual or Group Coverage,
calls received on the personal line follow the owner's coverage and not the
coverage patterns of other extensions that share the personal line.
When no principal user is assigned for a personal line, calls received on the
personal line cannot be forwarded to outside telephone numbers or to non-local
extensions (Release 6.1 and later systems). Calls follow the Individual Coverage
patterns of all senders who share the line and the Group Coverage pattern of the
extension with the lowest logical identification number (lowest numbered jack on
the module).
Two users can join a call in progress (including a conference call), for up to three
users on the same personal line.
Outside lines/trunks used as personal lines cannot be assigned to pools and
cannot be assigned as jacks for loudspeaker paging, Music-On-Hold, or
maintenance alarms.
ARS cannot be used on personal lines.
In all modes, personal lines are not factory-assigned to single-line telephones or
tip/ring devices connected to 016 (T/R), 012 (T/R), or 008 OPT modules, or to
ports programmed for tip/ring operation on 016 ETR or 412 LS-ID-ETR modules.
In Release 2.1 and later systems, calls received on personal lines with Do Not
Disturb on go immediately to coverage instead of waiting for the Coverage Delay
Interval.
Mode Differences
Hybrid/PBX Mode
When Ringing/Idle Line Preference is turned on and ALS is set to select an SA
button, a single-line telephone user cannot select the personal line to make calls.
Outside calls, however, can be received on the personal line.
In Hybrid/PBX mode, the factory setting assigns personal lines to DLC positions
rather than to other multiline telephones.
Issue 1
April 1999
486