Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference page 878

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
General Feature Use and Telephone Programming
Telephone and Operator Features
Table D-2. Telephone and Operator Features for Analog Multiline and Single-Line
Telephones — Continued
Feature
System Speed Dial
Transfer
Voice Announce to Busy
On
Off
1 System operator feature only.
2 Centralized telephone programming only.
3 For analog multiline display telephone users, pressing *54 enters/exits Message operation mode. Analog
multiline telephones return to normal call handling after 15 seconds if the user has no messages. If the user has
messages, he or she must delete the messages or use the feature code or programmed button to exit Message
operation.
4 Display telephones only. Programming and feature codes are used with analog multiline, ETR, and
telephones.
5 English only: time is 12-hour (0100–1259) + 2 (A) or 7 (P). French and Spanish: time is 24-hour (0000–2359).
Feature
Prog Code Code
*24 + code
600-729
(600-729)
*774 774
*10
**10
2-Line Analog
Display Multiline
K P B
SpdDl
B
Trans
K P B
Voice
On
Off
Issue 1
April 1999
D-20
Single-
Line
K P B
B
K P B
MLS