Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference page 114

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features
Authorization Code
Centrex Operation
Conference
Digital Data Calls
Forward and
Follow Me
Headset Options
Hold
Last Number Dial
Night Service
In Release 6.0 and later Key or Hybrid/PBX mode systems, you can
activate or deactivate forwarding features, including Centrex
Transfer via Remote Call Forwarding but excluding Follow Me, at an
extension on the system by entering the authorization code for the
extension on the same system from which calls are to be forwarded.
You enter the authorization code, then activate or deactivate the
feature in the normal fashion. This is especially useful for a single-
line telephone where you must include a Pause character in a
Remote Call Forwarding dialing sequence, because the character
cannot be dialed at a single-line telephone. It is also useful when you
must change forwarding options for a phantom extension.
You must enter an authorization code before each outside call for a
conference. You may enter different authorization codes for different
outside calls, which is useful if different privileges are needed for
different outside calls.
Data calls can use authorization codes. If Account Code Entry is also
used, you must enter the authorization code after the account code.
Authorization codes can be used by video systems that allow the use
of # for feature codes.
In Release 6.0 and later Key or Hybrid/PBX mode systems, you can
activate or deactivate forward features, including Centrex Transfer
via Remote Call Forwarding but excluding Follow Me, at an
extension on the system by entering the authorization code for the
extension on the same system from which calls are to be forwarded.
You enter the authorization code, then activate or deactivate the
feature in the normal fashion. This is especially useful for a single-
line telephone, where you must include a Pause character in a
Remote Call Forwarding dialing sequence, since this character
cannot be dialed at a single-line telephone. This is also useful when
you must change forward options for a phantom extension.
Pressing the Headset Hang Up button deactivates the Authorization
Code feature.
Initiating Hold after entering an authorization code deactivates the
Authorization Code feature for subsequent calls.
For security reason, an authorization code is not saved by the Last
Number Dial feature.
When you activate the Authorization Code feature, you cannot use
Last Number Dial. After you turn off Authorization Code, you can use
Last Number Dial to dial the most recent number dialed.
You can use an authorization code when Night Service is activated.
For Night Service with Outward Restriction, you must enter a valid
password before entering an authorization code.
Issue 1
April 1999
54