Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference page 227

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features
Conference
Hold
HotLine
Inspect
Multi-Function
Module
Music-On-Hold
Paging
Park
When adding other participants to a conference, the conference
originator hears the hold reminder when the conference is on hold
for longer than one minute (if the originator is a telephone user) or
for longer than the operator hold timer setting (if the originator is an
operator).
If DLC operator automatic Hold is programmed and used by a DLC
operator while setting up a conference, the entire conference goes
on hold.
Both parties on an inside call cannot put each other on hold. If a
user presses the Hold button while waiting on hold for a conference
initiated by another user (an inside call) or if the user presses the
Conf button while waiting on hold on an inside call, the entire
conference call is disconnected.
The initiator of a conference call can leave the conference by
pressing Hold. The conference initiator can rejoin the conference
call by pressing the line button of any conference participant.
In Release 2.1 and later systems, a call that has been put on hold on
a Cover button can be added to a conference by a user who has a
personal line for the call.
Conference is not available at HotLine extensions (Release 5.0 and
later systems).
If you press the Conf button while Inspect is activated, Inspect is
canceled and the system tries to activate the Conference feature.
When a user joins a conference by using a shared outside line or
Shared SA button, the QCC display reflects the correct number of
participants. If the QCC operator uses the Inspect feature to verify
the number of participants, however, the number shown on the
display does not include participants joining the conference on a
shared button.
The Conference feature cannot be used on the MFM because the
system ignores the switchhook flash sent by the MFM.
If the first participant put on hold for a conference is an outside call,
the caller hears Music-On-Hold until the second participant is
added. When a conference originator puts the conference on hold,
Music-On-Hold is not activated.
You cannot add speakerphone and loudspeaker paging calls to a
conference.
You cannot park conference calls. If a QCC operator tries to park a
conference call by pressing the Start button and then pressing the
DSS button for the park zone, the park is denied and the operator is
reconnected to the conference call.
Issue 1
April 1999
167