Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference page 738

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features
System Access/Intercom Buttons
SSA buttons cannot be assigned to a single-line telephone. A single-line
telephone cannot be the principal extension for a Shared SA button unless the
telephone is connected to an MFM.
When two or more users answer the same call on a Shared SA button, the red
and green LEDs next to the button go on, but only one person can talk to the
caller. Privacy should be used to eliminate competition for the same calls.
Calls received on DID trunks ring on an SA button and on all SSA buttons for the
receiving button.
Mode Differences
Hybrid/PBX Mode
SA buttons, including Shared SA buttons, are available only in Hybrid/PBX mode.
Key and Behind Switch Modes
ICOM buttons are available only in Key and Behind Switch modes.
Telephone Differences
Direct-Line Consoles
Each DLC is assigned one SA Ring or ICOM Ring and one SA Voice or ICOM
Voice button. Additional SA or ICOM buttons can be assigned to a DLC.
Queued Call Consoles
A QCC, which uses Call buttons, cannot be assigned SA buttons, including SSA
buttons. It cannot be assigned ICOM buttons because the QCC is available only
in Hybrid/PBX mode.
Other Multiline Telephones
In Hybrid/PBX mode, each multiline telephone (except for a DLC) and
Multi-Function Module (MFM) device is automatically assigned one SA Ring, one
SA Voice, and one SA Originate Only button.
In Key and Behind Switch modes, each multiline telephone (including a DLC) and
MFM device is automatically assigned one ICOM Ring and one ICOM Voice
button.
Issue 1
April 1999
678