Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference page 242

Hide thumbs Also See for MERLIN LEGEND Release 7.0:
Table of Contents

Advertisement

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features
Coverage
The type of Group Coverage receivers programmed:
In Release 4.1 and later systems, the Group Coverage Ring Delay is set
for each sender's extension. When Group Coverage is used in conjunction
with Individual Coverage, calls should ring at receivers for Individual
Coverage first. Consider the following factors before setting the Group
Coverage Ring Delay for an extension:
In Release 4.1 and later systems, the system manager uses system
programming to set a Primary Cover Ring Delay (1–6 rings) for each
sender.
In releases prior to 4.1, a systemwide value is set for the Coverage Delay
Interval through system programming (1–9 rings). When used in
combination with Delay Ring, this value should be higher than the Delay
Ring Interval.
— Only Group Cover buttons on multiline telephones.
— Both Group Cover buttons and the QCC queue.
— Only the QCC queue.
— Only a calling group.
— If a sender has only Primary Coverage and any receiver's Primary
Cover buttons are set to Delay Ring, the value for the Group
Coverage Ring Delay should be higher than the Primary Cover Ring
Delay value for each sender.
— If a sender has both Primary and Secondary Coverage and all the
receivers' Cover buttons are set for Immediate Ring, the Group
Coverage Ring Delay should be set higher than the Primary Cover
Ring Delay or the 2-ring fixed Secondary Cover Delay Interval.
— If both Primary and Secondary Cover buttons are programmed for a
sender and any receiver's Primary and/or Secondary Cover buttons
are programmed for Delay Ring, the value should be higher than
whichever of the following is greater:
Primary Cover Ring Delay.
Fixed Secondary Cover Delay Interval (two rings) plus the
Secondary Cover Ring Delay.
NOTE:
In releases prior to 4.1, the value set for the Delay Ring Interval
(1–6 rings) through system programming affects Individual Coverage
only. This setting is replaced in Release 4.1 and later systems.
Issue 1
April 1999
182

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MERLIN LEGEND Release 7.0 and is the answer not in the manual?

Table of Contents