Alarm Clock - Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features

Alarm Clock

Alarm Clock
At a Glance
Users Affected
Reports Affected
Modes
Telephones
MLX Display Label
Description
If you have a display telephone, you can use it as an alarm clock and set it to beep
at a particular time to remind you of an appointment, meeting, or other important
event. Until canceled, the alarm sounds every day at the set time.
NOTE:
The Alarm Clock feature is not supported on ETR and MLS telephones. For
information about setting time reminders, see
598.
Each MLX telephone and analog multiline display telephone has a timer to time
calls, meetings, breaks, or other events. When activated, the timer appears at the
top of the display, next to the date, and starts counting. It counts to 59 minutes
and 59 seconds, then resets to zero and continues counting.
To Set the Alarm
To set the alarm on an MLX display telephone, follow the procedure below:
1. Press the Menu button.
2. Select Alarm Clock [AlClk]. If this feature is not displayed, press the
More button. The display shows the alarm status (on/off) and the time set.
3. For English-language operation, dial a 4-digit time from 0100 to 1259 and
select am/pm to switch the displayed time from A.M. to P.M. or back again.
For French- or Spanish-language operation, dial a 4-digit time from 0000 to
2359. If you make an error, select Reset and redial.
4. Select On.
5. Press the Home button. A bell appears on the Home screen.
Telephone users, operators
None
All
MLX display and analog multiline telephones
AlarmClk [Alarm]
''Reminder Service'' on page
Issue 1
April 1999
40