Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference page 890

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
General Feature Use and Telephone Programming
Telephone Programming
Table D-7. Programming MLX Telephones by Using the Display
Step
1 Label the button to be
programmed.
NOTE:
Skip this step if the feature
will not be programmed
onto a button.
2 Begin programming.
3 Identify the button to be
programmed.
To delete the features currently
programmed on the button:
To display features:
Action
Remove the clear label cover from the telephone
by pulling up on the tab that extends from the top of
the cover.
Write the feature name on the card next to the
button to be programmed.
Replace the cover.
Press Menu.
Select Ext Program from the display.
Select Start from the display.
Press the button you labeled.
NOTE:
Note: If the feature does not get programmed
onto a button, press any line button. This
does not affect the button in any way.
The display identifies the feature currently
programmed on the button. If no feature is
programmed, the display indicates that the button
is blank.
Select Delete from the display.
The button is now blank .
Press the button you labeled again to continue
programming.
NOTE:
If the currently programmed feature was not
deleted from the button, the new feature
programmed onto it will replace it.
Select List Feature from the display.
The screen lists feature names in alphabetical
order.
Issue 1
April 1999
D-32