Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference page 399

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features
Forward and Follow Me
Other Multiline Telephones
To forward calls to an extension, either press a programmed Forward button and
dial the destination extension number, or press the Feature button, dial 33, and
dial the destination extension number. If you are forwarding to a non-local
extension, dial a pound sign (#) after the non-local extension number. If you are
off hook on an SA or ICOM button, you hear a confirmation tone (double-break in
the dial tone), and then the dial tone is removed. If a programmed Forward button
is used, the green LED next to the button turns on.
To forward calls to an outside telephone number, either press a programmed
Forward button, or press the Feature button and dial 33. Then select the outside
line/trunk or pool on which to route forwarded calls by dialing the ARS or pool
dial-out code (Hybrid/PBX mode only), the Idle Line Access code (usually 9; Key
and Behind Switch modes only), the line/trunk number (usually 801–880), or *
(Centrex line, any mode). If you are using Centrex Transfer via Remote Call
Forwarding, you may need to press the Hold button to enter a 1.5-second Pause
character; consult your Centrex provider. Press Hold at any time after entering the
dial-out code, line/trunk number, or *. Then dial the destination telephone number
followed by a pound sign (#) to signal the end of the dialing sequence.
If you are off hook on an SA or ICOM button, you hear a confirmation tone, and
then the dial tone is removed. If a programmed Forward button is used, the green
LED next to the button turns on.
To turn on Follow Me, press the Feature button, dial 34, and dial the forwarding
telephone's extension. If you are off hook on an SA or ICOM button, you hear a
confirmation tone, and then the dial tone is removed. An MLX display telephone
user can also use Follow Me by pressing the Feature button, selecting the feature
from the display, and dialing the forwarding telephone's extension.
In Release 6.0 and later systems, you can activate or deactivate Forward or
Remote Call Forwarding from a local system multiline telephone by first entering
your authorization code. When you hear inside dial tone, press the Feature button
and dial 33, or dial #33 or *33, depending on the type of telephone at the
extension you are using.
To turn off Forward, Remote Call Forwarding, and Follow Me at the originating
multiline telephone, press the programmed Forward button, or press the Feature
button and dial 33; then dial your own extension number (in effect, "forwarding"
calls to that extension). If you are off hook on an SA or ICOM button, you hear a
confirmation tone, and then dial tone is removed. If a programmed Forward button
is used, the green LED next to the button turns off.
Issue 1
April 1999
339