Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference page 812

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features
Uniform Dial Plan Features
CTI Link
(continued)
Direct Voice Mail
Directories
Display
Forward and
Follow Me
any other caller. Users at CTI-linked PassageWay Telephony Services
extensions must use the telephones at their extensions to make transfers
to non-local dial plan extensions or to add conferees to a conference.
They cannot use their PassageWay applications. A PassageWay
Telephony Services client display does not provide an indication when a
conferee is dropped.
Collected digits are not sent across the network.
Direct voice mail cannot be used for non-local dial plan extensions.
Non-local dial plan extensions cannot be included in a local Extension
Directory.
Non-local dial plan extensions can be included in Personal and System
Directories.
Use a remote networked system's System Directory cannot be used to
make calls.
PRI tandem trunks can provide label and extension number display at the
destination MLX or ETR display telephone. The system manager
programs this capability to allow display of the label (name), extension
number, or both. The system supports the display of 5-digit DEFINITY
ECS or DEFINITY ProLogix Solutions system extension numbers.
If an incoming PRI call with ANI is directed over PRI tandem trunks only,
the trunk label and ANI information can display at the display telephone
extension where the call arrives.
Tandem tie trunks do not support this display. Calls between networked
systems on tie trunks display as outside calls do.
Display operation for Forwarding, redirected transfers, and returned
transfers is generally not supported across a private network. When a call
is transferred and travels over PRI tandem trunks, the display shows the
transferring extension. A forwarded call arriving at a remote extension
displays as though the caller had reached the extension directly.
Follow Me is not supported across a private network.
In Release 6.0 (Hybrid/PBX mode only), Forward is not supported across
a private network.
In Release 6.1 and later systems (Hybrid/PBX mode only), Forward is
supported across a private network.
Consider the following: A BRI call comes in to System A and is forwarded
with no Forward Delay over tie lines with E&M signaling to a non-local
extension on System B. If the extension on System B does not answer
the call within one or two rings, the call is dropped. To solve the problem,
set Forward Delay to at least one ring so that System B waits for a ring
signal before it disconnects from the call.
Issue 1
April 1999
752