Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference page 219

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features
Conference
NOTE:
ETR and MLS telephones have no fixed Drop buttons. Instead a Drop
button can be programmed in Hybrid/PBX and Key modes by dialing a
programming code of *777 or by pressing the Feature button and dialing
777.
Leaving a Conference
The conference originator can leave the conference by pressing the Hold button
(the conference continues). If a conference originator (excluding a QCC operator)
leaves a conference by either hanging up or selecting another line, the entire
conference is disconnected.
Considerations and Constraints
Transmission quality may vary during the conferencing of outside lines.
A call to a busy number cannot be added to a conference.
Pressing the Drop button and the line button for a participant also disconnects a
participant who joined the conference by using a shared personal line or an SA or
ICOM button.
When a conference originator puts the conference on hold, Music-On-Hold is not
activated.
In Release 1.1 and later systems, the system automatically selects an SA or
ICOM button when a user presses the Conf button. In Release 1.0 systems, the
system does not automatically select an SA or ICOM button; you must select the
line manually.
Beginning with Release 1.1, pressing the Conf button causes one of the following
to happen:
If the system is in Hybrid/PBX mode and SA buttons are available, the
system automatically selects one, in the following order:
1.
2.
3.
4.
If the system is not in Hybrid/PBX mode or no SA button is available, the
prompt Select a Line appears on Line 2 of the display on an MLX
display telephone.
SA Originate Only (Ring)
SA Originate Only (Voice)
SA Ring
SA Voice
Issue 1
April 1999
159