Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference page 728

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Features
Station Message Detail Recording (SMDR)
Basic Rate Interface
Callback and Call
Waiting
Caller ID
Camp-On
Conference
Coverage
Forward and
Follow Me
The number of a BRI line is shown in the LINE field of the SMDR report.
Call timing begins when an outgoing call is answered. Therefore, calls
that are unanswered at the far end do not have an SMDR call record.
In Release 4.1 and prior systems, call timing for incoming calls begins
when the call is answered. In Release 4.2 and later systems with the Talk
Time option enabled, timing for incoming calls to Auto Login or Auto
Logout calling groups begins when the system detects the call.
SMDR begins measuring the duration of callback calls when the line/trunk
is seized and the system begins dialing the call.
In Release 4.1 and prior systems, call-waiting calls are timed as soon as
the call is answered.
In Release 4.2 and later systems with the Talk Time option enabled,
timing for incoming calls to Auto Login or Auto Logout calling groups
begins when the system detects the call.
Calling party numbers for incoming calls (including remote access calls)
received on a facility with Caller ID are recorded in the SMDR report only
if the SMDR report is set for ISDN format.
If an incoming call is camped on but is not picked up by the other
extension, the extension of the user who activated Camp-On is shown in
the STN field of the SMDR report. If an incoming call is camped on and
picked up by the destination extension, the destination extension is
shown in the STN field of the SMDR report.
When a conference call includes inside and outside participants, records
are generated only for outside participants. When a call is dropped from a
conference, it is considered complete and is recorded.
The extension at which an Individual or Group Coverage call is answered
is shown on the SMDR report. In Release 4.2 and later systems, when an
Auto Login or Auto Logout calling group is assigned as a Group Coverage
receiver, calls are reported following the same rules that apply to other
incoming calls for the group.
If the system is programmed to track both incoming and outgoing calls,
two SMDR records are generated when an outside call is forwarded to an
outside telephone number. One record shows the incoming call, and the
other record shows the call made to the destination telephone number,
with the forwarding extension as the originator.
The Remote Call Forwarding number to which incoming calls are to be
forwarded is completed by pressing #. The SMDR report includes the #
with the number for calls forwarded to the number. In Release 6.0 and
later systems, if a Pause character is included in a Centrex Transfer via
Remote Call Forwarding dial sequence, it also appears in the report.
Issue 1
April 1999
668