Release 5.0 Enhancements (June 1997) - Lucent Technologies MERLIN LEGEND Release 7.0 Feature Reference

MERLIN LEGEND Communications System Release 7.0
Feature Reference 555-670-110
Prior Releases: Features and Enhancements

Release 5.0 Enhancements (June 1997)

Pause cannot be originated from a single-line telephone or a remote access user.
A multiline telephone user in the local system must enter an authorization code to
activate the feature.
A remote access user may activate the feature without using an authorization
code. Barrier code requirements, however, do apply.
Authorization Codes and
Remote Call Forwarding
In Release 6.0 and later Key or Hybrid/PBX mode systems, forwarding features
(including Centrex Transfer via Remote Call Forwarding, but excluding Follow Me)
can be activated or deactivated at a multiline telephone by entering the
authorization code for the extension from which calls are to be forwarded. The
user enters the authorization code, then activates or deactivates the forwarding
feature in the normal fashion. This is especially useful for a single-line telephone
user who must include a Pause character in a Centrex Transfer via Remote Call
Forwarding dialing sequence, because the character cannot be dialed at a single-
line telephone. It is also useful when activating Call Forwarding or Remote Call
Forwarding at phantom stations or via remote access (for example, from another
switch in the network). No other features can be used by entering an authorization
code in this fashion.
Release 5.0 Enhancements
(June 1997)
Release 5.0 includes all Release 4.2 functionality, plus the enhancements listed
below.
Computer Telephony Integration (CTI)
Beginning with Release 5.0, a PassageWay
the MERLIN LEGEND Communications System to a LAN server running Novell
®
NetWare
control and monitor MLX and analog multiline telephone (BIS only) operations.
The physical connection for the CTI link is an MLX port on a 008 MLX or 408 MLX
module on the MERLIN LEGEND Communications System control unit and an
ISDN link interface card plugged into the customer's server. The feature is
available for Hybrid/PBX mode systems only.
software allows Lucent Technologies-certified telephony applications to
0
0
®
Telephony Services CTI link from
Issue 1
April 1999
xxv
®