Verifying Real-Time Performance Monitoring; Viewing Real-Time Performance Monitoring Information; Operational Mode Commands For Real-Time Performance Monitoring - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Related
Documentation

Verifying Real-Time Performance Monitoring

Viewing Real-Time Performance Monitoring Information

Related
Documentation

Operational Mode Commands for Real-Time Performance Monitoring

Copyright © 2010, Juniper Networks, Inc.
user@switch# set data-size size
Enable hardware timestamping of RPM probe messages:
11.
[edit services rpm probe owner test test-name]
user@switch# set hardware-timestamp
Configuring Real-Time Performance Monitoring (J-Web Procedure) on page 3704
Understanding Real-Time Performance Monitoring on EX Series Switches on page 3700
For details on these configuration statements, see the Junos OS Services Interfaces
Configuration Guide at
http://www.juniper.net/techpubs/software/junos/index.html
Viewing Real-Time Performance Monitoring Information on page 3713
Real-time performance monitoring (RPM) on EX Series switches enables you to configure
and send probes to a specified target and monitor the analyzed results to determine
packet loss, round-trip time, and jitter. The J-Web interface provides a graphical view of
RPM information for EX Series switches.
To view the RPM information using the J-Web interface:
Select >
Troubleshoot RPM
1.
Select the
2. Round Trip Time
included. Clear the check-box to view the graph without the round-trip time.
From the
Refresh Time
3.
Configuring Real-Time Performance Monitoring (J-Web Procedure) on page 3704
Chapter 130: Real-Time Performance Monitoring (RPM)
> .
View RPM
check box to display the graph with round-trip time
list, select a refresh time interval for the graph.
.
3713