Reverse-Oif-Mapping - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Required Privilege
Level
Related
Documentation

reverse-oif-mapping

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring OSPF Timers
reverse-oif-mapping {
no-qos-adjust;
}
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options multicast interface interface-name],
[edit logical-systems logical-system-name routing-options multicast
interface interface-name],
[edit routing-instances routing-instance-name routing-options multicast
interface interface-name],
[edit routing-options multicast interface interface-name]
Statement introduced in Junos OS Release 9.2.
Statement introduced in Junos OS Release 9.2 for EX Series switches.
The no-qos-adjust statement added in Junos OS Release 9.5.
The statement introduced in Junos OS Release 9.5 for EX Series switches.
no-qos-adjust
Enable the routing device to identify a subscriber VLAN or interface based on an IGMP
or MLD request it receives over the multicast VLAN.
The remaining statement is explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Managing Subscriber Overcommitment
Chapter 73: Configuration Statements for Layer 3 Protocols
1943