Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2041

Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
NOTE: The IPv4 multicast routing table (
table ( ) are not supported for this statement.
inet6.1
If you do not specify a routing table name with the
software uses the default routing tables, which are
for the multicast cache.
routing-table-name —Name of the routing table, in the following format:
[ ]
protocol .identifier
protocol is the protocol family. It can be
family, for the ISO protocol family, or
iso
is a positive integer that specifies the instance of the routing table.
identifier
Default:
inet.0
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
passive
Creating Routing Tables
Chapter 73: Configuration Statements for Layer 3 Protocols
inet.1 ) and the IPv6 multicast routing
routing-table-name
for unicast routes and
inet.0
inet6 for the IPv6 family,
for an ISO routing instance.
instance-name.iso.0
statement, the
inet.1
inet for the IPv4
1945