Receive - Juniper JUNOS OS 10.3 - SOFTWARE Manual

receive

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
receive receive-options;
[edit logical-systems logical-system-name protocols rip],
[edit logical-systems logical-system-name protocols rip group group-name neighbor
neighbor-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
rip],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
rip group group-name neighbor neighbor-name],
[edit protocols rip],
[edit protocols rip group group-name neighbor neighbor-name],
[edit routing-instances routing-instance-name protocols rip],
[edit routing-instances routing-instance-name protocols rip group group-name neighbor
neighbor-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure RIP receive options.
receive-options —One of the following:
—Accept both RIP version 1 and version 2 packets.
both
none —Do not receive RIP packets.
version-1 —Accept only RIP version 1 packets.
—Accept only RIP version 2 packets.
version-2
Default: both
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
send on page 1960
Configuring RIP Update Messages
Chapter 73: Configuration Statements for Layer 3 Protocols
1931