Table of Contents
Advertisement
7.
Close the printer's top and front covers. If this is the printer's
initial installation skip to step 2 in the next section, "Installing
or Replacing the Fuser Oil Bottle."
Installing or Replacing the Fuser Oil
Bottle
The fuser oil bottle usually needs replacing after printing
approximately 12,000 single-sided pages at 5% coverage.
Caution:
Always remove the fuser and oil bottle before moving,
transporting, or storing the printer for extended periods
to prevent printer damage due to an oil spill. Such
damage is not covered under the printer warranty.
1.
Turn off the printer if you are replacing the fuser oil bottle and
the printer is on.
2.
Open the printer's top cover if it is closed (fig. 2.13).
3.
Open the 2 oil bottle locks by turning them out toward the
sides (fig. 2.16).
Fig. 2.16 Open the Oil Bottle Locks
2-14
Installationbb
_________________________________________
Cleaning Roller Locks
Oil Bottle Locks
Front of Printer
Advertisement
Table of Contents
Troubleshooting
