Xante ScreenWriter Colour ScreenWriter User Manual page 282

3. Pull the duplexer back, rotating the upper part first to free its
top tabs from the printer slots; then, ease the duplexer back
until the fixing pins are free from the LFU slots (fig. 9.17).
Then, repack the duplexer in its original packing.
Note: If you are not shipping the duplexer, store the duplexer
in a location that meets the guidelines in "Storing the
Printer" earlier in this chapter.
Top Cover
Fixing Pins
Fig. 9.17 Remove the Duplexer
4. Replace the LFU caps by sliding them straight back into the
LFU (fig. 9.18).
Caps
Fig. 9.18 Replace the LFU Caps
9-16 Maintenance and
Printer Slots
Top Tabs
LFU Slots
Media Exit Cover
LFU Caps
Specificationsbb ________________________