Table of Contents
Advertisement
Figure 10.19 shows upgrade installation locations.
Fig 10.19 Controller Board
Installing SODIMM and Firmware Upgrades
SODIMMs are used for RAM upgrades. The resolution upgrade is a
firmware (flash ROM) change and a FIFO SIMM change.
RAM Upgrades (SODIMMs)
Standard RAM configuration is 64 MB for the XANTÉ Colour
ScreenWriter 600 and 256 MB for the XANTÉ Colour ScreenWriter
1200 and Pro. Your printer features interleaved DRAM for faster
processing and better buffering capabilities.
RAM can be upgraded with 16 and 64 MB SODIMMs installed in
the DRAM banks (fig. 10.19). SODIMMs must be installed in pairs.
If you use both 16 MB and 64 MB SODIMMs, the pair of 64 MB
SODIMMs must be installed in the DRAM banks labeled 0 (0/0 and
0/1). The following list shows the valid DRAM SODIMM
installations for your printer.
10-20
Optionsbb
__________________________________________
Advertisement
Table of Contents
Troubleshooting
