Enhanced Screen Calibration - Xante ScreenWriter Colour ScreenWriter User Manual

Note: The uploads progress appears in the middle of the
Configuration Message window (fig. 3.16). For
example the message says "10 configurable items,"
"20 Configurable items," and so on until the number
reaches the total number of configurable items
originally listed on your controller. The cursor stops
spinning when uploading is finished.
4. Click Save As (fig. 3.16). When the Save dialog box appears,
select the directory to which you want to save the file; then,
name the file and click Save. You return to the Configuration
window (fig. 3.15). If you want to load the file, go to step 5; if
not, skip to step 8.
5. Click Load (fig. 3.15), locate and select the appropriate file,
and click Open. You return to the Configuration window (fig.
3.15).
Note: The name of the file now appears below Using
Configuration File in the Configuration window. If
<<no file>> appears there, no file has been selected.
6. Click Update Configuration (fig. 3.15) to download the file to
a printer. A Configuration updated message appears when the
download is complete.
Note: The Save As and Update Configuration options are
disabled until the file finishes downloading.
7. Click Close (fig. 3.15). The Configuration window closes.
8. Select File: Quit; Command Center closes.

Enhanced Screen Calibration

XANTÉ Command Center's Graphics menu has a Enhanced Screen
Calibration option. This option allows you to change the enhanced
screen values to achieve the best output according to the lpi (lines
per inch) used for a specific job.
3-34 Macintosh Setupbb ____________________________________