Xante ScreenWriter Colour ScreenWriter User Manual page 344

E:E7 DRUM CLUTCH
E:E8 FUSE CLUTCH
E:E9 BELT SENSOR
E:EL ERASE LED
E:FIFO
E:F0 COOLING FAN
E:F2 OZONE FAN
E:F4 FUSER FAN
E:F5 HV UNIT
E:HO FUSER TEMP
E:H2 FUSER TEMP2
E:H3 FUSER TEMP3
11-6 Troubleshootingbb
There is a drum cleaning clutch
error. (Service)
There is a fuser unit clutch
error. (Service)
There is a belt marker sensor
error. Replace the OPC belt
cartridge. (Operator)
There is an erase LED error.
(Service)
The FIFO SIMM is not present,
is not properly inserted, or is
broken. See chapter 10 for
location of FIFO SIMM.
(Operator)
There is a cooling fan error.
(Service)
There is an ozone fan error.
(Service)
There is a fuser fan error.
(Service)
There is an HV (high voltage)
unit error. Check OPC charge
corona for a broken wire. If
broken, replace the OPC belt
cartridge. (Operator/Service)
There is a fuser thermistor error.
(Service)
There is a fuser temperature 2
error. (Service)
There is a fuser temperature 3
error. (Service)
____________________________________