Xante ScreenWriter Colour ScreenWriter User Manual page 279

b. Use a clean, lint-free cloth or paper towel to absorb any
remaining oil from the bottle area of the printer; then,
dispose of the oil following all applicable safety laws
and regulations.
Note:
c. Place 2 clean, lint-free cloths or paper towels gently into
the printer's oil bottle area;
Caution:
3. Close the oil bottle locks by rotating them in toward the center
of the printer (fig. 9.9).
4. Open the cleaning roller locks by turning them in toward the
center of the printer (fig. 9.9).
5. Lift the cleaning roller straight up and out of the printer (fig.
9.11). Then, repack the roller in its original shipping bag.
Cleaning Roller
Roller Tension
Lever
Fig. 9.11 Remove the Cleaning Roller
6. Locate the two roller tension levers (fig. 9.11) and pull them
toward the front of the printer until they lock in place.
_________________________
If a large spill occurs, use the oil syringe from the
printer's starter kit to remove the majority of the
excess oil; then, use the lint-free cloth or paper
towel to absorb the rest.
Never force the cloth or towel into the
printer, but make sure it fills the space.
Roller Tension
Lever
Maintenance and Specifications 9-13