Installing The Paper Feeder - Xante Accel-a-Writer 8200 Options Manual

Installing the Paper Feeder

To install the paper feeder
1. Unpack the paper feeder and, with the connector to the back
left, set the feeder next to the printer.
2. Make sure the feeder's two securing locks, one on each side
under the lock icons, are pulled forward so that they are open
(fig. 9.1).
Fig. 9.1 Open the Feeder's Securing Locks
3. Turn off your printer and disconnect the power cord and all
interface cables.
4. Remove the connector cover from the back left corner of the
printer (fig. 9.2).
Fig. 9.2 Remove the Connector Cover
9-4 Optionsbb ___________________________________________