Xanté Utilities Installer - Xante ScreenWriter Colour ScreenWriter User Manual

1. Insert the XANTÉ Utilities CD-ROM into your PC.
2. Select Start: Run (Windows 95, 98, Me, or 2000), and use
Browse to select XCSW_UTILS.
3. Select Acrobat: ar405eng.exe (or appropriate language file)
and Click Open. Then, click OK in the Run window.
4. Follow instructions on screen to complete installation.
5. See the CD-ROM's Read1st.txt file and see Adobe Acrobat's
Readme file installed with the program on your system.
XANTÉ Utilities Installer
XANTÉ Utilities Installer installs XANTÉ Command Center, your
printer's PPD, and selected application PDFs or PPDs; then, it launches
the Adobe PostScript Printer Driver installer.
XANTÉ Utilities Installer runs properly only on an Intel based
computer running Windows 95, 98, Me, 2000, or NT.
To load the Adobe PostScript printer drivers manually, see the
CD-ROM's Readme.pdf and "Adobe PostScript Printer Drivers" later in
this chapter. To load QuarkXPress PDFs manually, see "PDFs Folder"
later in this chapter.
To install XANTÉ Command Center manually, use the appropriate
following procedure.
• For Windows 9.X and Me: Go to XUtils: Win95_98 and
manually copy all files in that folder to a folder on your host
disk.
• For Windows 2000 and NT: Go to XUtils: WinNT_2000. Then,
manually copy Altopar.sys to your system's WinNT: System:
Drivers folder or WinNT32: System32: Drivers folder (folder
names vary among systems) and copy the rest of the files in the
WinNT_2000 folder to a folder on your hard-disk (for example
C:\Xante).
___________________________________________ PC Setup 4-5