Table of Contents
Advertisement
4.
Review the configuration information in the Start Copying Files
window (fig. 4.4). If you need to make any changes, click Back
and make the appropriate changes.
Fig. 4.4 Start Copying Files Window
5.
Click Next to install XANTÉ Utilities and any application-
specific PPD that you selected. When the setup will now
launch message appears, click OK and use the following
appropriate procedure for your operating system:
Note: Windows 95, 98, and Me: If the AdobePS driver
setup begins before you can click Finish in the
XANTÉ setup, press ALT + TAB to switch back to the
XANTÉ Installer screen. Click Finish in that screen
and proceed with the AdobePS driver installation.
Windows NT and 2000: The XANTÉ setup waits for
the AdobePS Driver setup to finish before showing the
window to click Finish.
6.
Go to the appropriate section for your operating system in
"Adobe PostScript Printer Drivers" to continue the installation.
4-8 PC
Setupbb
__________________________________________
Advertisement
Table of Contents
Troubleshooting
