Xante ScreenWriter Colour ScreenWriter User Manual page 141

To linearize your printer's colors
1. Print a color calibration page either from the printer's front
panel or from XANTÉ Command Center using one of the
following procedures:
Note: Always print the calibration page using the same
media and toner used for final copy.
Fig. 4.27 Color Calibration Page
a. Front Panel: Select the LPI (lines per inch), resolution, and
screen type (Spot Function) that will be used for final
output. Then, select Setup: Utility: Utility Pages: Color
Calibrate from the printer's front panel. A color calibration
page prints with patches for all colors (CMYK). Then,
open Command Center and select Graphics: Linearization.
When the Linearization window appears (fig. 4.28), go to
step 2.
___________________________________________ PC Setup 4-37