Configuring The Ppd - Xante ScreenWriter Colour ScreenWriter User Manual

The AdobePS printer driver and your printer's PPD are installed.
Continue to the next section to configure the PPD and complete the
driver setup.

Configuring the PPD

1. Select Chooser from the Apple menu. The Chooser window
appears (fig. 3.3).
Fig. 3.3 AdobePS Chooser Window
2. Select AdobePS from the box on the left (top left in a network
environment); a list of available printers appears to the right.
Note: If the printer does not appear in the list, verify that
—the printer is on and cable connections are secure
—LocalTalk or EtherTalk (depending on your setup)
is enabled on the printer front panel
—the correct protocol (AppleTalk or EtherTalk) is
selected on the front panel.
—your Macintosh is setup for LocalTalk or EtherTalk
in the AppleTalk Control panel.
—Power Mac G3 and G4 computers and iMac
computers do not have LocalTalk ports.
_____________________________________ Macintosh Setup 3-15