Table of Contents
Advertisement
b.
For version 4.X only, press the F4 key for bindery
emulation (XANTÉ does not support NDS [NetWare
Directory Services]).
c.
Press Insert and type in your printer's default PostScript
name adding _PS as an extension. This is the printer's
default Novell print server name that appears on the
start-up page.
d.
Press Escape until you return to the Available Options
menu.
5.
Set up the print queue name.
a.
Select Available Options: Print Queue Information
(version 3.X) or Available Options: Print Queues
(version 4.X) and press Enter.
b.
Press Insert and type in a queue name. XANTÉ
recommends that the name be twelve or fewer
characters.
6.
Link the Print server name to the Print Queue name.
a.
For version 3.X:
1)
Highlight the print queue name that you entered in
step 5b and press Enter.
2)
Highlight Queue Servers and press Enter.
3)
Press Insert and highlight the print server name
that you entered in step 4c and press Enter.
b.
For version 4.X:
1)
Enter the Print Queues Volume or press Insert for
a list of available Volumes. Highlight the Volume
Object and press Enter twice.
2)
Highlight the print queue name that you entered in
step 5b and press Enter.
5-8 Ethernet Setup ________________________________________
Advertisement
Table of Contents
Troubleshooting
