Configuring The Printer - Xante ScreenWriter Colour ScreenWriter User Manual

10. Click Finish. The InstallShield Wizard Complete window
appears (fig. 4.19).
Fig. 4.19 InstallShield Wizard Complete Window
11. Select Yes, I want to restart my computer now. Then, click
Finish.
Note: If you select No, I will restart my computer later, you
must restart it before you can run Command Center.
12. Select File: Close. The Printers window closes.
After the AdobePS printer driver and PPD are installed and
configured, you need to do one of the following:
Windows 95, 98, or Me: Verify that printer interfaces are configured
properly; see "Configuring the Printer" in the next section.
Windows NT 2000 or 4.X: Set up your printer for TCP/IP or
AppleTalk by continuing to either "LPR Port Setup for TCP/IP" or
"AppleTalk Setup for EtherTalk" in chapter 5.

Configuring the Printer

If necessary, configure the printer's communication interface using
the front panel.
4-24 PC Setupbb __________________________________________