Xante ScreenWriter Colour ScreenWriter User Manual page 409

Custom Dot Gain Calibration
XANTÉ Technology that provides densitometer support to calibrate
printer output for specific inks, media, and environmental conditions.
See also Dot Gain and Dot Gain Calibration.
Default Settings
Values or settings used by your printer if no other direction is
received from an application. Printer default settings can be changed
using the front panel. Some settings can be changed through XANTÉ
Command Center. See also Factory Default Settings.
Densitometer
A device that produces a set light source and measures the
transmission of light through or reflection of light from a surface
compared to a common density standard.
Density
A measurement of the transmission of light through or reflection of
light from a surface. For example, the thicker (denser) the ink, the
less light it reflects.
Dot Gain
The result of media absorbing ink which causes the ink to spread out
rather than forming a crisp, precise pattern. This gives the
appearance of a "gain" in value of the tint. For example, an 80%
magenta tint may appear to be 83% because of dot gain. See also
Tint.
Dot Gain Calibration
XANTÉ technology that provides gamma control to adjust image
grayscale values to help compensate for dot gain. See also Dot Gain
and Custom Dot Gain Calibration.
Downloaded Font
A font that has been transferred to the memory or hard disk of a
printer.
___________________________________________ Glossary G-7