Table of Contents
Advertisement
2.
Choose Networking: Novell Print Server: File Servers. Click
Add New. The following window appears.
Fig. 5.15 New File Server Window
3.
Type in the name of the Novell file server that your printer will
poll for print jobs exactly as it appears in PConsole; then click
OK to return to the main menu.
Note: The printer enters a waiting state while it saves the file
server name. Do not proceed until the printer displays
the READY/IDLE message.
4.
If you did not use the printer's default Novell print server
name in file server configuration with PConsole (in "Configure
the Novell Server (NetWare 3.X and 4.X)" see step 4c),
change the print server name to agree with the print server
name set up on the file server.
Note: If you used the printer's default Novell print server
name (see "Selecting the Novell Names" earlier in this
chapter), this step is not required.
a.
Choose Networking: Novell Print Server: Print Server
Name. The following window appears.
Fig. 5.16 Print Server Name Window
5-18 Ethernet Setup ________________________________________
Advertisement
Table of Contents
Troubleshooting
