The area should meet the following guidelines
•
Be a level (± 1°), sturdy surface capable of supporting the printer
and consumables: 145 lb (66 kg) plus added options
•
Maintain an environment without rapid changes:
— Temperature: 50° to 90.5° Fahrenheit (10° to 32.5° Celsius)
— Relative humidity: 20% to 80%
— Altitude: 0 to 8202 ft. (0 to 2500 m)
•
Be away from direct sunlight, open flames, refrigerators, water
faucets, humidifiers, heaters, or similar equipment
•
Be away from strong vibrations or electromagnetic fields
•
Maintain a proper host-printer distance for communications:
within 10 feet (3 m) for parallel; within 25 ft. (7.5 m) for serial;
within 1000 feet (305 m) for LocalTalk
•
Be close to a surge protected, grounded electrical outlet with the
proper voltage. (A surge protected outlet helps prevent power
source fluctuations from damaging your printer. Surge protectors
are available through most office supply and computer stores.)
Printer Package
Unpack the printer using the following procedure and save the
packing materials.
1.
Cut the shipping straps, lift the top of the carton off the printer,
and remove the plastic bag around the printer.
Warning!
The printer weighs approximately 101 lbs (46 kg)
without toner, cassettes, and media installed. Always
have two people lift the printer by the recessed grip
areas on the bottom sides.
2.
Lift the printer free of the carton and place it in a location
meeting the requirements in the preceding section (fig. 2.2).
2-4
Installationbb
_________________________________________