Table of Contents
Advertisement
Warning!
Toner is combustible. Never dispose of it by
incineration.
2.
Pull the toner waste pack out of the printer and seal it using the
label on the side of the pack (fig. 9.29). Dispose of the toner
pack following all safety laws and regulations in your area.
3.
Remove the seal from the new waste pack and slide the pack
into the printer making sure it seats in place.
4.
Close the front cover. When READY/IDLE appears, the
printer is ready for use.
Replacing the Transfer Roller
To replace the transfer roller
1.
Turn off the printer and disconnect the power cord.
2.
Open the back cover and locate the transfer roller (fig. 9.30)
Transfer Roller
Back Cover
Fig. 9.30 Open the Transfer Unit
3.
Lift the two (one on each end) transfer roller lock levers.
4.
Lift the transfer roller up and out of the printer. Then clean the
roller area with a dry, clean, lint-free cotton cloth.
9-26 Maintenance and
Transfer Unit
Specificationsbb
________________________
Registration
Roller
Transfer Roller
Lock Lever
Advertisement
Table of Contents
Troubleshooting
